Aria Add®, The Anti-Shrink & Warpage masterbatch

Aria Polymer company is manufacturer of anti-shrink and warpage masterbatches for PP and PE to increase dimensional stability in molded parts after injection. Also it causes high production rate and enhancement in mechanical properties.

Plastics such as PP and PE are semi-crystalline with several applications in injection molding. However, they are prone to show trouble in dimensional stability, shrinkage or warpage, after injection. These are some critical problems provided by non-uniform thermal contraction for many plastics in injection moldings. Various chain relaxations in crystallization process of PP or PE usually cause shrinkage, distortion or warpage.

Anti-warpage MasterbatchThe shape altering in molded parts is the result of unsuitable crystallization. Minimizing these troubles usually depends on processing conditions, mold geometry and materials characteristics. However, in many cases, optimized processing parameters and part design cannot be sufficient due to materials characteristics. They need special additives to modify crystallization process efficiently. The appropriate nucleating agents are added to plastics to increase crystallization temperature and cause uniform chain relaxation in solidification process.

Anti-warpage Masterbatch

Aria Add® anti-shrink and warpage is able to influence crystallization process of PP and PE to:

  • Prevent shrinkage and warpage in molded parts.
  • Increase dimensional stability.
  • Improve mechanical properties.
  • Remove parts from mold at higher temperature.
  • Reduction of injection cycle time.
  • Show no adverse effect with other additives and fillers.

 

 

Anti-shrink and warpage of Aria Polymer Pishgam Company

Aria Polymer Pishgam Co. is manufacturer of Aria Add 4458® for PP and Aria Add 4129® for PE based parts to prevent shrinkage and warpage in injection molding and enhance.